Nickel Chromium Mesh from China manufacturer - Heanjia Super-metals Co., Ltd.

Price:	20.0~50.0 USD
Payment Terms:	T/T,L/C,D/A,D/P,WU
Place of Origin:	Beijing, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Means of Transport: Ocean,Land,Air

Packing: Sealed up with plastic, out...

Nichrome Mesh: Nickel-Chromium Mesh

Production Capacity: 2 Tons per Month

Delivery Date: 3-40days

1.Good resistance to oxidation at high temperatures
2.Good deformation ability, thermal stability
3.Mesh: 0.5-250 Thickness: min. 0.05mm

Nichrome Mesh

Heanjia Super-metals Co., Ltd. supplies Nichrome Mesh. Nichrome Mesh has good deformation ability, thermal stability, mechanical character, shockproof ability in thermal state and anti-oxidization. Nichrome Mesh is highly recommended for resistance heater elements operating at high temperatures or running under cyclic heating and cooling conditions. Nichrome Mesh is widely used in industrial furnaces, industrial and domestic applications, Mesh wound resistors and potentiometers.

Chemical and Physical Properties

Alloy	Chemical composition			Max. Service Temp. (ºC)	Density (g/cm3)	Melting point ( ºC)	Specific heat J/g.
Alloy	Ni	Cr	Fe	Max. Service Temp. (ºC)	Density (g/cm3)	Melting point ( ºC)	Specific heat J/g.
Cr20Ni80	Remanent	20.0-23.0	≤1.0	1200	8.4	1400	0.44
Cr30Ni70	Remanent	28.0-31.0	≤1.0	1250	8.1	1380	0.461
Cr15Ni60	55.0-61.0	15.0-18.0	Remanent	1150	8.2	1390	0.494
Cr20Ni35	34.0-37.0	18.0-21.0	Remanent	1100	7.9	1390	0.5
Cr20Ni30	30.0-34.0	18.0-21.0	Remanent	1100	7.9	1390	0.5

Mesh Specification

Wire Mesh

GB/T 5330.1 ; GB/T 17492 ; JB/T 9155

0.5-250 mesh/Inch; Thickness: Min0.05mm

Characteristics

1. Good deformation ability, thermal stability, mechanical character, shockproof ability in thermal state and anti-oxidization

2. Highly recommended for resistance heater elements operating at high temperatures or running under cyclic heating and cooling conditions

3. High resistivity and very good resistance to oxidation at high temperatures

Applications

1. Heating Elements

2. Hot-Mesh Cutter

3. High-Temperatures Uses

4. Igniters

Manufacture Process

The manufacture of mesh is started with producing wire. The wire production includes: forging, rolling, annealing and drawing. The wire with right material and wire diameter will be produced. Then the warp wires will be put and prepared on the weaving machine, and then start weaving. From wire to mesh, manufacture process is operated with high standard quality control system. There will be quality test for each batch of product, such as test to diameter tolerance, content, mesh aperture, etc.

Packing Process & Transportation

Packaging: Seal up, with plastic inside and wooden case or carton outside; or according to the customer's requirements.

Transportation: By air or By sea

Other Terms