FeCrAl Alloy 0Cr15Al5 Mesh from China manufacturer

Price:	10.0~50.0 USD
Payment Terms:	T/T,L/C,D/A,D/P,WU
Place of Origin:	Beijing, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Means of Transport: Ocean,Land,Air

Packing: Sealed up with plastic, out...

Application: Others

Material: Others

Production Capacity: 4 Tons per Month

Delivery Date: 3-40days

Type: Woven

Heat Resisting Mesh: FeCrAl Heat Resisting Mesh

1.High resistance, low temperature coefficient
2.Good corrosion resistance under high temperature
3.Mesh: 0.5-250 mesh/Inch Thickness: Min0.05mm

FeCrAl 0Cr15Al5 Heat Resisting Mesh

Heanjia Super-metals Co., Ltd. supplies FeCrAl 0Cr15Al5 Heat Resisting Mesh. The FeCrAl 0Cr15Al5 Heat Resisting Mesh with the characteristics of high resistance, low temperature coefficient of electric resistance, high operating temperature, good corrosion resistance under high temperature, as well as the lower price, it is widely used in industrial electric furnace, household electrical appliance and far infrared ray device.

Chemical Composition (%)

Alloy	C	P	S	Mn	Si	Cr	Ni	Al	Fe
0Cr15Al5	0.12	0.025	0.025	0.7	≤1.00	14.5-15.5	—	4.5-5.3	Rest

Properties

Alloy	0Cr15Al5
Yield strength(MPa)	590-690
Elongation (%)	> 12
Density g/cm3	7.15
·Electrical resistivity (Ωmm2 / m)	1.30 ± 0.05
The highest temperature continuous operation (° C)	750
Melting point (° C)	1500
Thermal conductivity (kJ / m * h * ° C)	52.4
Coefficient of linear expansion (α×10-6 / ° C)	6.15

Mesh Specification

Wire Mesh

GB/T 5330.1 ; GB/T 17492 ; JB/T 9155

0.5-250 mesh/Inch; Thickness: Min0.05mm

Manufacture Process

The manufacture of mesh is started with producing wire. The wire production includes: forging, rolling, annealing and drawing. The wire with right material and wire diameter will be produced. Then the warp wires will be put and prepared on the weaving machine, and then start weaving. From wire to mesh, manufacture process is operated with high standard quality control system. There will be quality test for each batch of product, such as test to diameter tolerance, content, mesh aperture, etc.

Packing Process & Transportation

Packaging: Seal up, with plastic inside and wooden case or carton outside; or according to the customer's requirements.

Transportation: By air or By sea

Other Terms